38
Installation drawings
DA 3360
1) The front section of the wall housing unit must be
fitted with a shelf to the depth of the partition wall. If the
appliance is fitted further back, e.g. to accomodate a
front panel, then the shelf depth should be
correspondingly deeper.
2) The partition wall in the wall unit must be removable.
3) In extraction mode: when measuring for the height of
the wall housing unit and the cut-out, account must be
taken of any accessories fitted, e.g. a silencer.
4) Recirculation mode requires
installation kit DUU 151.
5) Installation with drop-down frame DAR 3000: account
must be taken of differing cupboard heights.
DA 3460
1) The front section of the wall housing unit must be
fitted with a shelf to the depth of the partition wall. If the
appliance is fitted further back, e.g. to accomodate a
front panel, then the shelf depth should be
correspondingly deeper.
2) The partition wall in the wall unit must be removable.
3) In extraction mode: when measuring for the height of
the wall housing unit and the cut-out, account must be
taken of any accessories fitted, e.g. silencer, DSM
module.
4) Recirculation mode requires installation kit DUU 151.
5) Installation with drop-down frame DAR 3000: account
must be taken of differing cupboard heights.
DA 3490
1) The front section of the wall housing unit must be
fitted with a shelf to the depth of the partition wall. If the
appliance is fitted further back, e.g. to accomodate a
front panel, then the shelf depth should be
correspondingly deeper.
2) The partition wall in the wall unit must be removable.
3) In extraction mode: when measuring for the height of
the wall housing unit and the cut-out, account must be
taken of any accessories fitted, e.g. silencer, DSM
module.
4) Recirculation mode requires installation kit DUU 151.
5) Installation with drop-down frame DAR 3000: account
must be taken of differing cupboard heights.
