Page 41 -

41
Accessories for
demineralised water
G 7895/1 Aqua Purificator
• For use on G 7883 and G 7893
• Housing unit for two E 310 or E 318
demineralisation cartridges
• Integrated conductivity meter
• Generally recommended quality for final
rinse < 15 μS/cm
• H 850 (820), W 300, D 600 mm
• Freestanding unit, can be built under
• Outer panelling in stainless steel or white
• Electrical connection AC 230 V 50 Hz
• Water connection:
1 x Cold water 3⁄4" threaded union for
connection of cartridge (hose approx. 1.2
m long)
1 x connection of cartridge to machine
with 3⁄4" threaded union (approx. 1.2 m
long)
2.5–10 bar flow pressure to cartridge
(pressure loss approx. 1 bar per cartridge)
E 310 Water demineralisation cartridge,
pre-charged
• Pressure-proof stainless-steel cartridge
• H 570, Ø 240 mm
• Complete with vent and pressure relief
valve
• Contains 20 l of reusable mixed resin
Delivery capacity in litres depends on the
salt content of the raw water and the max.
acceptable conductivity.
Conductivity table
5 μS/cm 10 μS/cm
5°dH 4250 4500
10°dH 2125 2250
15°dH 1420 1500
20°dH 1070 1125
25°dH 850 950
30°dH 710 750
The information given in this chart is
intended only as a guide.
LWM Module C conductivity meter
• For E 310/E 318 water demineralisation
cartridges
• H 118, W 235, D 110 mm
• Electrical connection AC 230 V 50 Hz
• 2 hoses, approx. 1.9 m,
3⁄4" threaded union
• Integrated conductivity meter,
0–20 μS/cm
1.5 μS/cm = tri-distilled
2.5 μS/cm = bi-distilled
20.0 μS/cm = mono-distilled
E 318 Water demineralisation cartridge,
empty
• Charged with 20 l of single-use resin
E 315 single-use resin
• 20 l homogenous, mixed-bed resins
for E 318
• Box with two 10 l bags, vacuum-packed in
plastic sacks
• Replacement filter bag
E 316 Refill set
• Plastic barrel with lid and funnel
• For 30 l disposable resin