Page 54 -

54
Accessories
E 442 Injector sleeve
• For MIS instruments with
4–8 mm Ø, screw fitting
• Length 121 mm, Ø 11 mm
• Cap opening Ø 6 mm
(M.-Nr. 4174960)
• Clip (M.-Nr. 4174850)
E 443 Injector sleeve
• For MIS instruments with
8–8.5 mm Ø
• Length 121 mm, Ø 11 mm
• Cap opening Ø 10 mm
(M.-Nr. 4 174 970)
• Clip (M.-Nr. 4 174 850)
E 456 Clip
• For MIS instruments
E 475 Support
• For MIS insert
• To stabilise the injector
sleeves (M.-Nr. 4692430)
E 445 Caps
• 12 caps for injector sleeves
• Opening 6 mm
E 446 Caps
• 12 caps for injector sleeves
• Opening 10 mm
E 469 Injector sleeve
• For MIS instruments/urology
• Length 300 mm, Ø 11 mm
• Cap opening Ø 6 mm
(M.-Nr. 4174960)
• Clip (M.-Nr. 4174850)
E 467 Injector sleeve
• For MIS instruments/
clip forceps
• Length 205 mm, Ø 11 mm
E 336 Injector sleeve MIBO
• Length 121 mm, Ø 11 mm
E 447 Female adapters
• For male Luer lock, screw
fitting for E 450/1, O 176,
O 183
E 449 Male adapters,
without support*
• For female Luer lock, screw
fitting for E 450/1, O 176,
O 183
E 452 Injector jets
• Length 60 mm, Ø 2.5 mm,
screw fitting, for injector units
E 453 Injector jets
• Clamps
• 110 mm long, Ø 4 mm,
screw fitting, for injector units
E 448 Silicone tube
• Luer lock adapter, male
• Length 300 mm, Ø 5 mm
• Jet with 8 x 1 mm thread
* The adapter with support is
available from Miele under
Mat.-Nr. 4 224 230.
E 464 Holder
• For injector jets E 454
13 x 65 mm
• Spring to adjust height
(M.-Nr. 4692440)
E 454 Injector jets
• For trocar sleeves with
10–15 mm Ø, 8 x 150 mm
• Spring to adjust height
(Mat.-Nr. 4692430)
E 471 Spring clip
• For injector jets
Ø 2.5 mm, for E 452
E 472 Spring clip
• For injector jets
Ø 4.0 mm, for E 351, E 453