DOCUMENT

48 Roof fan DDG 102 External fan for pitched roofs (with pitch of at least 22°) • The fan is located outside the dwelling • Single-sided radial fan • Exhaust socket 125/150 mm diameter • Connection of fan with the cooker hood via a coupling plug • Fan throughput: disconnected vent 440-1.000 m 3 /h M.-Nr. 5.909.230 Exterior wall fan AWG 102 External fan for exterior wall • The fan is located outside the dwelling • Single-sided radial fan • Exhaust socket 125/150 mm diameter • Control lead, 75 cm long, with coupling plug for connecting the fan with the cooker hood • Fan throughput: disconnected vent 410-1.000 m 3 /h M.-Nr. 5.680.680 External fan can be located anywhere inside the dwelling • Locating the fan in another room • Double intake fan • Exhaust socket 125/150 mm diameter • Connection of fan with the cooker hood via a coupling plug • Fan throughput: disconnected vent 280-900 m 3 /h M.-Nr. 6.029.260 Fan unit ABLG 202 Accessories for cooker hoods External fans The diameter of vent ducting has a major impact on the power output and noise development of cooker hoods. If the diameter of vent ducting is less than the largest possible diameter of the vent connection, the power output is reduced and operating noises are increased. For further information, please contact your dealer. Installation notes: When selecting the installation site, please ensure that the distance between the external fan to the canopy is at least 5 –7 m . Wall vent DMK 150 For ventilation and aeration • Wall vent Ø 100/110/125/150 mm for venting cooker hoods • Heat insulation - no backdraught of cold air • Energy - Blower Door test carried out, suitable for low-energy houses M.-Nr. 9.162.280 Control lead Required for connecting an external fan with the cooker hood STL-DA 5 (5 m) M.-Nr. 6.725.020 STL-DA 9 (9 m) M.-Nr. 4.837.110 STL-DA 12 (12 m) M.-Nr. 4.837.120 Notes for the problem-free operation of a cooker hood