DOCUMENT

44 Installation drawings DA 2360 1) Vent connection alternatively to rear DAR 3000 drop-down frame 1. Vented 2. Recirculation with conversion kit DUU 151 3. Cabinet korpus has to be shorten 50 mm compared to the cabinet door. For all other cabinets, details in DA 3360, 3460, and 3490 dimensioned drawings apply. A housing unit base is not required. Installing a DA 3490 in a 60 cm wide housing unit is not possible with the drop-down frame. Safe distance to cook top has to be kept by deepen rangehoods. DA 1260 DA 2390 1) Vent connection alternatively to rear DA 186 *Furniture panel dimensions DA 3690 1) Vented, recirculation with DUU 150. 2) Housing unit carcase is 38 mm shorter than the door. This also applies to adjacent cabinets when the appliance is installed in a 600 mm wide housing unit. 3) Installation is also possible in a 60 cm wide housing unit. In this case, the door of the housing unit must open upwards (top-hinged) to enable access to grease filters. This also applies to adjacent cabinets. 4) Vent connection alternatively to the rear. 5) After the wall unit has been installed, a partition can be fitted. The slots for grease filters and odour-absorbing filters for use in recirculation mode must be accessible. 6) Alternatively, side sectiions can be added to the wall unit. In regard to dimenions for wall unit height and cut-outs, fitted accessories should be taken into account (e.g. silencers, XKM module).