DOCUMENT

43 Cooker hoods from Miele DA 3466 1) The front section of the wall housing unit must be fitted with a shelf to the depth of the partition wall. If the appliance is fitted further back, e.g. to accomodate a front panel, then the shelf depth should be correspondingly deeper. 2) The partition wall in the wall unit must be removable. 3) In extraction mode: when measuring for the height of the wall housing unit and the cut-out, account must be taken of any accessories fitted, e.g. silencer, DSM module. 4) Recirculation mode requires installation kit DUU 151. 5) Installation with drop-down frame DAR 3000: account must be taken of differing cupboard heights. DA 3496 1) The front section of the wall housing unit must be fitted with a shelf to the depth of the partition wall. If the appliance is fitted further back, e.g. to accomodate a front panel, then the shelf depth should be correspondingly deeper. 2) The partition wall in the wall unit must be removable. 3) In extraction mode: when measuring for the height of the wall housing unit and the cut-out, account must be taken of any accessories fitted, e.g. silencer, DSM module. 4) Recirculation mode requires installation kit DUU 151. 5) Installation with drop-down frame DAR 3000: account must be taken of differing cupboard heights. DA 3366 1) The front section of the wall housing unit must be fitted with a shelf to the depth of the partition wall. If the appliance is fitted further back, e.g. to accomodate a front panel, then the shelf depth should be correspondingly deeper. 2) The partition wall in the wall unit must be removable. 3) In extraction mode: when measuring for the height of the wall housing unit and the cut-out, account must be taken of any accessories fitted, e.g. a silencer. 4) Recirculation mode requires installation kit DUU 151. 5) Installation with drop-down frame DAR 3000: account must be taken of differing cupboard heights.