DOCUMENT

42 Installation drawings Rangehoods Installation drawings below should be used as a planning guide only and must be read in conjuction with the more comprehensive operating and/or installation instructions supplied with each product and which can be accessed on-line in advance for your planning purposes via www.miele.com.au or www.miele.co.nz. DA 399-7 CLASSIC 1) Extraction 2) Recirculation 3) Ventilation grille at top for recirculation 4+5) Installation cut-out (5 not requ'd for recirculation) 695-1015 825-1145 1) 2) 3) 290 270 160 515 55 150 55 260 270 2) 1) 4) 5) 520 PUR 98 W 1) Extraction 2) Recirculation 3) Ventilation grille at top for recirculation 4+5) Cut-out (5 not required for recirculation) DA 6690 W 1) Extraction 2) Recirculation 3) Ventilation grille at top for recirculation 4+5) Installation cut-out (5 not requ'd for recirculation) DA 6296 W LUMEN 1) Extraction 2) Recirculation 3) Ventilation grille at top for recirculation 4+5) Installation cut-out (5 not requ'd for recirculation) DA 424 V-6 VARIA 1) Installation area/site 2) Installation alternatively with spacer frame 3) A supply lead, and for vented mode flexible vent ducting, must be pre-fitted for the connection in the ceiling to the connection of the cooker hood. DA 6700 D Aura 1) Mains connection cable. A distance of at least 300 mm must be maintained between the top of the appliance and the ceiling or any furniture units installed above the appliance. DA 6996 W Pearl 1) Cut-out for cooker hoods with hard-wired connection rather than a plug. 2) Opening for ducting connection at the back. 3) Ventilation grille positioned at the top for recirculation. A distance of at least 200 mm must be maintained between the top of the appliance and the ceiling or any furniture units installed above the appliance.