DOCUMENT

W Product available to special order only, estimated delivery time 3 months from date of order ^ Naber Compair Steel flow duct components must only be connected to each other or to original Miele rangehood accessories, but never to any other type/ form of ducting, including other types of Naber or other rectangular ducting Rangehood accessories Item no. Product Description AUD 99501033 DAS 150 Aluminium vent hose for ducting, 60 cm long, 150 mm diameter, supplied in 5 metre pack. Suitable with all Miele rangehoods 192 11258630 DMK 150-1 Wall vent kit for extracting rangehoods, 150 mm, stainless steel grill. Suitable for all Miele rangehoods and KMDA's 359 04623200 DDF 150 W Roof vent for extraction, for tiled roof with min 22º pitch, stainless steel casing. Suitable for all Miele rangehoods and KMDA's 576 03915292 DKS 150 W Condensate trap, prevents condensation from re-entering rangehood canopy. Suitable for all Miele rangehoods and KMDA's 171 08269360 DASD 150 Silencer to help reduce noise. Suitable for all Miele rangehoods 194 09583750 DASDV 150 Connector piece for installation between silencer and rangehood or between 2 silencers. Suitable for all Miele rangehoods 57 Naber Compair rectangular steel ducting Suitable for all Miele Rangehoods and KMDA's 99501354 SF-VRO 150 ^ Flat duct ventilation pipe. 1000 mm length and can be shortened, connection dimensions 216 w x 83 h mm with seal. Comes with 2 SF profile seals, pre-assembled 174 99501362 SF-VRO 150 support W ^ Support bar for insertion into flat duct SF-VRO 150 for laying in the floor structure, 2 support bars needed for SF-VRO 150. Standing load 100 kg 67 99501356 SF-UR 150 ^ Deflector 90, suitable for flat ducts SF-VRO 120 99501357 SF-RBV 150 ^ Pipe bend vertical 90°. With air deflector, suitable for flat ducts SF-VRO 82 99501358 SF-RBH 150 ^ Pipe bend horizontal 90°. With air deflector, suitable for flat ducts SF-VRO 92 99501360 SF 150 ^ Pipe set for downdraft ventilation. Space-saving arrangement of the exhaust pipes for extractor hoods with downdraft or downdraft ventilation, connection dimensions (222 x 89 mm) for direct connection to the ventilation system, guide direction (left / right) can be varied by repositioning, suitable for flat ducts SF-VRO 196 99501361 SF-VEST150 W ^ Offset end piece. Ø 148 mm (connection dimension inside), use when connecting downdraft hoods, suitable for flat ducts SF-VRO 182 99501359 SF-RVB 150 ^ Pipe connector. Connector for flat duct pipes, suitable for flat ducts SF-VRO 75 99501355 SF-EST 150 ^ End piece. Transition from flat to round, suitable for flat ducts SF-VRO 87 99501405 SF-Profile Seal ^ SF profile seal can be adapted to SF-VRO flat duct pipes as well as to the hood connection of the SF-150 pipe set for cooktop extractors 45 Kitchen